PRODUCT DESCRIPTION:

Interact 21-0289 contains an extremely efficient conductive black. This black produces a conductive network in thermoplastics at a much reduced concentration in comparison to more traditional blacks. Unlike the traditional blacks which lose their conductivity when multiple passed through the extruder, this new system resists such loss allowing for the use of high percentages of regrind in the finished product. This product is available as both a pellet for extrusion and injection or blow molding and as a powder for rotational molding.

CARRIER RESIN:

APPEARANCE: Black pellets or powder

SPECIFIC GRAVITY: 0.996 g/cm³

SPECIFICATIONS: Nominal 1/8" x 1/8" cylindrical or spherical

LET DOWN RATIO:

28% INTERACT 21-0289 in polypropylene copolymer for sheet extrusion will produce a sheet with surface resistivity of 10⁴ Ohms/sq. 45% INTERACT 21-0289 in fractional melt HDPE for sheet extrusion with a surface resistivity of 10⁵ Ohms/sq. The concentrate in your specific resin carrier processed in your own equipment may vary. We recommend 28% as a starting point for polypropylene and 45% for HDPE to determine the proper formulation for your product.

PACKAGING:

Gaylord boxes lined with polyethylene. Other packaging is available at a slight additional charge.

INFORMATION:

For additional information about this product contact Victor Lee at the ICC New Product Development Center in Dover, Ohio (Phone 330-364-4133 or Fax 330-364-9617).

Note: These data are typical properties and are not to be used for establishing minimum material specifications. They are the latest available at time of publication and are authentic to the best knowledge of the Company. The properties are listed solely to give general guidance and are not to be construed as a warranty of any type. Please contact ICC Industries Incorporated for specific data to meet your design criteria.